|
|
@@ -0,0 +1,413 @@
|
|
|
+; Start a new pool named 'www'.
|
|
|
+; the variable $pool can we used in any directive and will be replaced by the
|
|
|
+; pool name ('www' here)
|
|
|
+[www]
|
|
|
+
|
|
|
+; Per pool prefix
|
|
|
+; It only applies on the following directives:
|
|
|
+; - 'access.log'
|
|
|
+; - 'slowlog'
|
|
|
+; - 'listen' (unixsocket)
|
|
|
+; - 'chroot'
|
|
|
+; - 'chdir'
|
|
|
+; - 'php_values'
|
|
|
+; - 'php_admin_values'
|
|
|
+; When not set, the global prefix (or NONE) applies instead.
|
|
|
+; Note: This directive can also be relative to the global prefix.
|
|
|
+; Default Value: none
|
|
|
+;prefix = /path/to/pools/$pool
|
|
|
+
|
|
|
+; Unix user/group of processes
|
|
|
+; Note: The user is mandatory. If the group is not set, the default user's group
|
|
|
+; will be used.
|
|
|
+user = app
|
|
|
+group = app
|
|
|
+
|
|
|
+; The address on which to accept FastCGI requests.
|
|
|
+; Valid syntaxes are:
|
|
|
+; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on
|
|
|
+; a specific port;
|
|
|
+; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
|
|
|
+; a specific port;
|
|
|
+; 'port' - to listen on a TCP socket to all addresses
|
|
|
+; (IPv6 and IPv4-mapped) on a specific port;
|
|
|
+; '/path/to/unix/socket' - to listen on a unix socket.
|
|
|
+; Note: This value is mandatory.
|
|
|
+listen = 127.0.0.1:9000
|
|
|
+
|
|
|
+; Set listen(2) backlog.
|
|
|
+; Default Value: 511 (-1 on FreeBSD and OpenBSD)
|
|
|
+;listen.backlog = 511
|
|
|
+
|
|
|
+; Set permissions for unix socket, if one is used. In Linux, read/write
|
|
|
+; permissions must be set in order to allow connections from a web server. Many
|
|
|
+; BSD-derived systems allow connections regardless of permissions.
|
|
|
+; Default Values: user and group are set as the running user
|
|
|
+; mode is set to 0660
|
|
|
+;listen.owner = www-data
|
|
|
+;listen.group = www-data
|
|
|
+;listen.mode = 0660
|
|
|
+; When POSIX Access Control Lists are supported you can set them using
|
|
|
+; these options, value is a comma separated list of user/group names.
|
|
|
+; When set, listen.owner and listen.group are ignored
|
|
|
+;listen.acl_users =
|
|
|
+;listen.acl_groups =
|
|
|
+
|
|
|
+; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
|
|
|
+; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
|
|
|
+; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
|
|
|
+; must be separated by a comma. If this value is left blank, connections will be
|
|
|
+; accepted from any ip address.
|
|
|
+; Default Value: any
|
|
|
+;listen.allowed_clients = 127.0.0.1
|
|
|
+
|
|
|
+; Specify the nice(2) priority to apply to the pool processes (only if set)
|
|
|
+; The value can vary from -19 (highest priority) to 20 (lower priority)
|
|
|
+; Note: - It will only work if the FPM master process is launched as root
|
|
|
+; - The pool processes will inherit the master process priority
|
|
|
+; unless it specified otherwise
|
|
|
+; Default Value: no set
|
|
|
+; process.priority = -19
|
|
|
+
|
|
|
+; Choose how the process manager will control the number of child processes.
|
|
|
+; Possible Values:
|
|
|
+; static - a fixed number (pm.max_children) of child processes;
|
|
|
+; dynamic - the number of child processes are set dynamically based on the
|
|
|
+; following directives. With this process management, there will be
|
|
|
+; always at least 1 children.
|
|
|
+; pm.max_children - the maximum number of children that can
|
|
|
+; be alive at the same time.
|
|
|
+; pm.start_servers - the number of children created on startup.
|
|
|
+; pm.min_spare_servers - the minimum number of children in 'idle'
|
|
|
+; state (waiting to process). If the number
|
|
|
+; of 'idle' processes is less than this
|
|
|
+; number then some children will be created.
|
|
|
+; pm.max_spare_servers - the maximum number of children in 'idle'
|
|
|
+; state (waiting to process). If the number
|
|
|
+; of 'idle' processes is greater than this
|
|
|
+; number then some children will be killed.
|
|
|
+; ondemand - no children are created at startup. Children will be forked when
|
|
|
+; new requests will connect. The following parameter are used:
|
|
|
+; pm.max_children - the maximum number of children that
|
|
|
+; can be alive at the same time.
|
|
|
+; pm.process_idle_timeout - The number of seconds after which
|
|
|
+; an idle process will be killed.
|
|
|
+; Note: This value is mandatory.
|
|
|
+pm = dynamic
|
|
|
+
|
|
|
+; The number of child processes to be created when pm is set to 'static' and the
|
|
|
+; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
|
|
|
+; This value sets the limit on the number of simultaneous requests that will be
|
|
|
+; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
|
|
|
+; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
|
|
|
+; CGI. The below defaults are based on a server without much resources. Don't
|
|
|
+; forget to tweak pm.* to fit your needs.
|
|
|
+; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
|
|
|
+; Note: This value is mandatory.
|
|
|
+pm.max_children = 5
|
|
|
+
|
|
|
+; The number of child processes created on startup.
|
|
|
+; Note: Used only when pm is set to 'dynamic'
|
|
|
+; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
|
|
|
+pm.start_servers = 2
|
|
|
+
|
|
|
+; The desired minimum number of idle server processes.
|
|
|
+; Note: Used only when pm is set to 'dynamic'
|
|
|
+; Note: Mandatory when pm is set to 'dynamic'
|
|
|
+pm.min_spare_servers = 1
|
|
|
+
|
|
|
+; The desired maximum number of idle server processes.
|
|
|
+; Note: Used only when pm is set to 'dynamic'
|
|
|
+; Note: Mandatory when pm is set to 'dynamic'
|
|
|
+pm.max_spare_servers = 3
|
|
|
+
|
|
|
+; The number of seconds after which an idle process will be killed.
|
|
|
+; Note: Used only when pm is set to 'ondemand'
|
|
|
+; Default Value: 10s
|
|
|
+;pm.process_idle_timeout = 10s;
|
|
|
+
|
|
|
+; The number of requests each child process should execute before respawning.
|
|
|
+; This can be useful to work around memory leaks in 3rd party libraries. For
|
|
|
+; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
|
|
|
+; Default Value: 0
|
|
|
+;pm.max_requests = 500
|
|
|
+
|
|
|
+; The URI to view the FPM status page. If this value is not set, no URI will be
|
|
|
+; recognized as a status page. It shows the following informations:
|
|
|
+; pool - the name of the pool;
|
|
|
+; process manager - static, dynamic or ondemand;
|
|
|
+; start time - the date and time FPM has started;
|
|
|
+; start since - number of seconds since FPM has started;
|
|
|
+; accepted conn - the number of request accepted by the pool;
|
|
|
+; listen queue - the number of request in the queue of pending
|
|
|
+; connections (see backlog in listen(2));
|
|
|
+; max listen queue - the maximum number of requests in the queue
|
|
|
+; of pending connections since FPM has started;
|
|
|
+; listen queue len - the size of the socket queue of pending connections;
|
|
|
+; idle processes - the number of idle processes;
|
|
|
+; active processes - the number of active processes;
|
|
|
+; total processes - the number of idle + active processes;
|
|
|
+; max active processes - the maximum number of active processes since FPM
|
|
|
+; has started;
|
|
|
+; max children reached - number of times, the process limit has been reached,
|
|
|
+; when pm tries to start more children (works only for
|
|
|
+; pm 'dynamic' and 'ondemand');
|
|
|
+; Value are updated in real time.
|
|
|
+; Example output:
|
|
|
+; pool: www
|
|
|
+; process manager: static
|
|
|
+; start time: 01/Jul/2011:17:53:49 +0200
|
|
|
+; start since: 62636
|
|
|
+; accepted conn: 190460
|
|
|
+; listen queue: 0
|
|
|
+; max listen queue: 1
|
|
|
+; listen queue len: 42
|
|
|
+; idle processes: 4
|
|
|
+; active processes: 11
|
|
|
+; total processes: 15
|
|
|
+; max active processes: 12
|
|
|
+; max children reached: 0
|
|
|
+;
|
|
|
+; By default the status page output is formatted as text/plain. Passing either
|
|
|
+; 'html', 'xml' or 'json' in the query string will return the corresponding
|
|
|
+; output syntax. Example:
|
|
|
+; http://www.foo.bar/status
|
|
|
+; http://www.foo.bar/status?json
|
|
|
+; http://www.foo.bar/status?html
|
|
|
+; http://www.foo.bar/status?xml
|
|
|
+;
|
|
|
+; By default the status page only outputs short status. Passing 'full' in the
|
|
|
+; query string will also return status for each pool process.
|
|
|
+; Example:
|
|
|
+; http://www.foo.bar/status?full
|
|
|
+; http://www.foo.bar/status?json&full
|
|
|
+; http://www.foo.bar/status?html&full
|
|
|
+; http://www.foo.bar/status?xml&full
|
|
|
+; The Full status returns for each process:
|
|
|
+; pid - the PID of the process;
|
|
|
+; state - the state of the process (Idle, Running, ...);
|
|
|
+; start time - the date and time the process has started;
|
|
|
+; start since - the number of seconds since the process has started;
|
|
|
+; requests - the number of requests the process has served;
|
|
|
+; request duration - the duration in µs of the requests;
|
|
|
+; request method - the request method (GET, POST, ...);
|
|
|
+; request URI - the request URI with the query string;
|
|
|
+; content length - the content length of the request (only with POST);
|
|
|
+; user - the user (PHP_AUTH_USER) (or '-' if not set);
|
|
|
+; script - the main script called (or '-' if not set);
|
|
|
+; last request cpu - the %cpu the last request consumed
|
|
|
+; it's always 0 if the process is not in Idle state
|
|
|
+; because CPU calculation is done when the request
|
|
|
+; processing has terminated;
|
|
|
+; last request memory - the max amount of memory the last request consumed
|
|
|
+; it's always 0 if the process is not in Idle state
|
|
|
+; because memory calculation is done when the request
|
|
|
+; processing has terminated;
|
|
|
+; If the process is in Idle state, then informations are related to the
|
|
|
+; last request the process has served. Otherwise informations are related to
|
|
|
+; the current request being served.
|
|
|
+; Example output:
|
|
|
+; ************************
|
|
|
+; pid: 31330
|
|
|
+; state: Running
|
|
|
+; start time: 01/Jul/2011:17:53:49 +0200
|
|
|
+; start since: 63087
|
|
|
+; requests: 12808
|
|
|
+; request duration: 1250261
|
|
|
+; request method: GET
|
|
|
+; request URI: /test_mem.php?N=10000
|
|
|
+; content length: 0
|
|
|
+; user: -
|
|
|
+; script: /home/fat/web/docs/php/test_mem.php
|
|
|
+; last request cpu: 0.00
|
|
|
+; last request memory: 0
|
|
|
+;
|
|
|
+; Note: There is a real-time FPM status monitoring sample web page available
|
|
|
+; It's available in: /usr/local/share/php/fpm/status.html
|
|
|
+;
|
|
|
+; Note: The value must start with a leading slash (/). The value can be
|
|
|
+; anything, but it may not be a good idea to use the .php extension or it
|
|
|
+; may conflict with a real PHP file.
|
|
|
+; Default Value: not set
|
|
|
+;pm.status_path = /status
|
|
|
+
|
|
|
+; The ping URI to call the monitoring page of FPM. If this value is not set, no
|
|
|
+; URI will be recognized as a ping page. This could be used to test from outside
|
|
|
+; that FPM is alive and responding, or to
|
|
|
+; - create a graph of FPM availability (rrd or such);
|
|
|
+; - remove a server from a group if it is not responding (load balancing);
|
|
|
+; - trigger alerts for the operating team (24/7).
|
|
|
+; Note: The value must start with a leading slash (/). The value can be
|
|
|
+; anything, but it may not be a good idea to use the .php extension or it
|
|
|
+; may conflict with a real PHP file.
|
|
|
+; Default Value: not set
|
|
|
+;ping.path = /ping
|
|
|
+
|
|
|
+; This directive may be used to customize the response of a ping request. The
|
|
|
+; response is formatted as text/plain with a 200 response code.
|
|
|
+; Default Value: pong
|
|
|
+;ping.response = pong
|
|
|
+
|
|
|
+; The access log file
|
|
|
+; Default: not set
|
|
|
+;access.log = log/$pool.access.log
|
|
|
+
|
|
|
+; The access log format.
|
|
|
+; The following syntax is allowed
|
|
|
+; %%: the '%' character
|
|
|
+; %C: %CPU used by the request
|
|
|
+; it can accept the following format:
|
|
|
+; - %{user}C for user CPU only
|
|
|
+; - %{system}C for system CPU only
|
|
|
+; - %{total}C for user + system CPU (default)
|
|
|
+; %d: time taken to serve the request
|
|
|
+; it can accept the following format:
|
|
|
+; - %{seconds}d (default)
|
|
|
+; - %{miliseconds}d
|
|
|
+; - %{mili}d
|
|
|
+; - %{microseconds}d
|
|
|
+; - %{micro}d
|
|
|
+; %e: an environment variable (same as $_ENV or $_SERVER)
|
|
|
+; it must be associated with embraces to specify the name of the env
|
|
|
+; variable. Some exemples:
|
|
|
+; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
|
|
|
+; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
|
|
|
+; %f: script filename
|
|
|
+; %l: content-length of the request (for POST request only)
|
|
|
+; %m: request method
|
|
|
+; %M: peak of memory allocated by PHP
|
|
|
+; it can accept the following format:
|
|
|
+; - %{bytes}M (default)
|
|
|
+; - %{kilobytes}M
|
|
|
+; - %{kilo}M
|
|
|
+; - %{megabytes}M
|
|
|
+; - %{mega}M
|
|
|
+; %n: pool name
|
|
|
+; %o: output header
|
|
|
+; it must be associated with embraces to specify the name of the header:
|
|
|
+; - %{Content-Type}o
|
|
|
+; - %{X-Powered-By}o
|
|
|
+; - %{Transfert-Encoding}o
|
|
|
+; - ....
|
|
|
+; %p: PID of the child that serviced the request
|
|
|
+; %P: PID of the parent of the child that serviced the request
|
|
|
+; %q: the query string
|
|
|
+; %Q: the '?' character if query string exists
|
|
|
+; %r: the request URI (without the query string, see %q and %Q)
|
|
|
+; %R: remote IP address
|
|
|
+; %s: status (response code)
|
|
|
+; %t: server time the request was received
|
|
|
+; it can accept a strftime(3) format:
|
|
|
+; %d/%b/%Y:%H:%M:%S %z (default)
|
|
|
+; The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
|
|
|
+; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
|
|
|
+; %T: time the log has been written (the request has finished)
|
|
|
+; it can accept a strftime(3) format:
|
|
|
+; %d/%b/%Y:%H:%M:%S %z (default)
|
|
|
+; The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
|
|
|
+; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
|
|
|
+; %u: remote user
|
|
|
+;
|
|
|
+; Default: "%R - %u %t \"%m %r\" %s"
|
|
|
+;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
|
|
|
+
|
|
|
+; The log file for slow requests
|
|
|
+; Default Value: not set
|
|
|
+; Note: slowlog is mandatory if request_slowlog_timeout is set
|
|
|
+;slowlog = log/$pool.log.slow
|
|
|
+
|
|
|
+; The timeout for serving a single request after which a PHP backtrace will be
|
|
|
+; dumped to the 'slowlog' file. A value of '0s' means 'off'.
|
|
|
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
|
|
|
+; Default Value: 0
|
|
|
+;request_slowlog_timeout = 0
|
|
|
+
|
|
|
+; The timeout for serving a single request after which the worker process will
|
|
|
+; be killed. This option should be used when the 'max_execution_time' ini option
|
|
|
+; does not stop script execution for some reason. A value of '0' means 'off'.
|
|
|
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
|
|
|
+; Default Value: 0
|
|
|
+;request_terminate_timeout = 0
|
|
|
+
|
|
|
+; Set open file descriptor rlimit.
|
|
|
+; Default Value: system defined value
|
|
|
+;rlimit_files = 1024
|
|
|
+
|
|
|
+; Set max core size rlimit.
|
|
|
+; Possible Values: 'unlimited' or an integer greater or equal to 0
|
|
|
+; Default Value: system defined value
|
|
|
+;rlimit_core = 0
|
|
|
+
|
|
|
+; Chroot to this directory at the start. This value must be defined as an
|
|
|
+; absolute path. When this value is not set, chroot is not used.
|
|
|
+; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
|
|
|
+; of its subdirectories. If the pool prefix is not set, the global prefix
|
|
|
+; will be used instead.
|
|
|
+; Note: chrooting is a great security feature and should be used whenever
|
|
|
+; possible. However, all PHP paths will be relative to the chroot
|
|
|
+; (error_log, sessions.save_path, ...).
|
|
|
+; Default Value: not set
|
|
|
+;chroot =
|
|
|
+
|
|
|
+; Chdir to this directory at the start.
|
|
|
+; Note: relative path can be used.
|
|
|
+; Default Value: current directory or / when chroot
|
|
|
+;chdir = /var/www
|
|
|
+
|
|
|
+; Redirect worker stdout and stderr into main error log. If not set, stdout and
|
|
|
+; stderr will be redirected to /dev/null according to FastCGI specs.
|
|
|
+; Note: on highloaded environement, this can cause some delay in the page
|
|
|
+; process time (several ms).
|
|
|
+; Default Value: no
|
|
|
+;catch_workers_output = yes
|
|
|
+
|
|
|
+; Clear environment in FPM workers
|
|
|
+; Prevents arbitrary environment variables from reaching FPM worker processes
|
|
|
+; by clearing the environment in workers before env vars specified in this
|
|
|
+; pool configuration are added.
|
|
|
+; Setting to "no" will make all environment variables available to PHP code
|
|
|
+; via getenv(), $_ENV and $_SERVER.
|
|
|
+; Default Value: yes
|
|
|
+;clear_env = no
|
|
|
+
|
|
|
+; Limits the extensions of the main script FPM will allow to parse. This can
|
|
|
+; prevent configuration mistakes on the web server side. You should only limit
|
|
|
+; FPM to .php extensions to prevent malicious users to use other extensions to
|
|
|
+; exectute php code.
|
|
|
+; Note: set an empty value to allow all extensions.
|
|
|
+; Default Value: .php
|
|
|
+;security.limit_extensions = .php .php3 .php4 .php5 .php7
|
|
|
+
|
|
|
+; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
|
|
|
+; the current environment.
|
|
|
+; Default Value: clean env
|
|
|
+;env[HOSTNAME] = $HOSTNAME
|
|
|
+;env[PATH] = /usr/local/bin:/usr/bin:/bin
|
|
|
+;env[TMP] = /tmp
|
|
|
+;env[TMPDIR] = /tmp
|
|
|
+;env[TEMP] = /tmp
|
|
|
+
|
|
|
+; Additional php.ini defines, specific to this pool of workers. These settings
|
|
|
+; overwrite the values previously defined in the php.ini. The directives are the
|
|
|
+; same as the PHP SAPI:
|
|
|
+; php_value/php_flag - you can set classic ini defines which can
|
|
|
+; be overwritten from PHP call 'ini_set'.
|
|
|
+; php_admin_value/php_admin_flag - these directives won't be overwritten by
|
|
|
+; PHP call 'ini_set'
|
|
|
+; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
|
|
|
+
|
|
|
+; Defining 'extension' will load the corresponding shared extension from
|
|
|
+; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
|
|
|
+; overwrite previously defined php.ini values, but will append the new value
|
|
|
+; instead.
|
|
|
+
|
|
|
+; Note: path INI options can be relative and will be expanded with the prefix
|
|
|
+; (pool, global or /usr/local)
|
|
|
+
|
|
|
+; Default Value: nothing is defined by default except the values in php.ini and
|
|
|
+; specified at startup with the -d argument
|
|
|
+;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
|
|
|
+;php_flag[display_errors] = off
|
|
|
+;php_admin_value[error_log] = /var/log/fpm-php.www.log
|
|
|
+;php_admin_flag[log_errors] = on
|
|
|
+;php_admin_value[memory_limit] = 32M
|
Piotr Kwiecinski