Dockerfile

@@ -18,6 +18,12 @@ ARG MCPO_VERSION=0.0.20
 # release's uv.lock for its actual tested "mcp" version and update this too.
 ARG MCP_SDK_VERSION=1.17.0
 
+# Pinned supergateway release (npm). It serves a stdio MCP server as a native
+# streamable-HTTP endpoint. Bump by checking the new version's CLI flags still
+# match what entrypoint.sh assumes (--stdio/--outputTransport/--port/
+# --healthEndpoint).
+ARG SUPERGATEWAY_VERSION=4.1.0
+
 FROM python:3.12-slim-bookworm AS vendor
 ARG WEBFETCH_MCP_COMMIT
 RUN apt-get update && apt-get install -y --no-install-recommends git \
@@ -31,19 +37,26 @@ RUN mkdir /vendored \
 FROM python:3.12-slim-bookworm
 ARG MCPO_VERSION
 ARG MCP_SDK_VERSION
+ARG SUPERGATEWAY_VERSION
 
+# tini is PID 1: entrypoint.sh supervises two long-running processes, so
+# something needs to reap zombies and deliver signals properly.
 # Node.js 22, matching the version mcpo's own official image is built and
 # tested against (webfetch-mcp only requires >=18).
 RUN apt-get update && apt-get install -y --no-install-recommends \
         curl \
         ca-certificates \
         gnupg \
+        tini \
     && curl -fsSL https://deb.nodesource.com/setup_22.x | bash - \
     && apt-get install -y --no-install-recommends nodejs \
     && rm -rf /var/lib/apt/lists/*
 
 RUN pip install --no-cache-dir "mcpo==${MCPO_VERSION}" "mcp==${MCP_SDK_VERSION}"
 
+RUN npm install -g --omit=dev "supergateway@${SUPERGATEWAY_VERSION}" \
+    && npm cache clean --force
+
 COPY --from=vendor /vendored /app/webfetch-mcp
 WORKDIR /app/webfetch-mcp
 RUN npm ci --omit=dev
@@ -51,5 +64,5 @@ RUN npm ci --omit=dev
 COPY entrypoint.sh /entrypoint.sh
 RUN chmod +x /entrypoint.sh
 
-EXPOSE 8000
+EXPOSE 8000 8080
-ENTRYPOINT ["/entrypoint.sh"]
+ENTRYPOINT ["tini", "--", "/entrypoint.sh"]

README.md

@@ -1,12 +1,17 @@
 # webfetch-mcpo-docker
 
 A single Docker image exposing [`webfetch-mcp`](https://code.aneur.in/mirrors/webfetch-mcp)'s
-`web_search` and `web_fetch` tools over HTTP/OpenAPI, via [`mcpo`](https://github.com/open-webui/mcpo).
+`web_search` and `web_fetch` tools in two ways at once:
 
-`webfetch-mcp` is a stdio-only MCP server; `mcpo` exposes a wrapped MCP server over
+| Port | Protocol | For |
-HTTP by spawning it as a local child process. Since that spawn happens in-process
+|---|---|---|
-(not over the network) and `webfetch-mcp` has no HTTP/SSE mode of its own, both have
+| `8000` | OpenAPI, via [`mcpo`](https://github.com/open-webui/mcpo) | Open WebUI |
-to live in one image — that's what this repo builds.
+| `8080` | Native MCP (streamable HTTP) at `/mcp`, via [`supergateway`](https://github.com/supercorp-ai/supergateway) | Coding agents (opencode etc.) |
+
+`webfetch-mcp` is a stdio-only MCP server with no HTTP mode of its own. `mcpo` and
+`supergateway` each expose a wrapped stdio server over HTTP by spawning it as a local
+child process, so they have to live in the same image as `webfetch-mcp`. Each spawns
+its own `node server.mjs`.
 
 ## Build
 
@@ -17,7 +22,7 @@ docker build -t webfetch-mcpo-docker .
 ## Run
 
 ```sh
-docker run -p 8000:8000 \
+docker run -p 8000:8000 -p 8080:8080 \
   -e MCPO_API_KEY=some-secret \
   -e SEARXNG_BASE=http://searxng.example.internal:8080 \
   webfetch-mcpo-docker
@@ -28,24 +33,48 @@ served without authentication even when `MCPO_API_KEY` is set — only the gener
 tool endpoints (`/web_search`, `/web_fetch`) require it, as
 `Authorization: Bearer <MCPO_API_KEY>`.
 
+### opencode (or any MCP client)
+
+In `opencode.json`:
+
+```json
+{
+  "mcp": {
+    "webfetch": { "type": "remote", "url": "http://<host>:8080/mcp" }
+  }
+}
+```
+
+The `:8080` endpoint has no authentication; `MCPO_API_KEY` applies only to `:8000`.
+`/healthz` on `:8080` returns `ok`.
+
 ## Environment variables
 
 | Variable | Effect |
 |---|---|
 | `MCPO_API_KEY` | If set, tool endpoints require `Authorization: Bearer <value>`. If unset, `mcpo` serves unauthenticated (its own default behavior). |
 | `MCPO_PORT` | Port `mcpo` listens on inside the container. Default `8000`. |
+| `MCP_PORT` | Port the native MCP endpoint listens on. Default `8080`. |
+| `ENABLE_MCPO` / `ENABLE_MCP` | Set either to `false` to run only the other side. Both default `true`. |
 | `SEARXNG_BASE` | Passed through to `webfetch-mcp`; its own default (`http://localhost:8080`) applies if unset. |
 | `DEBUG` | Passed through to `webfetch-mcp`. `"true"` enables debug logging. |
 | `DETAILED_LOG` | Passed through to `webfetch-mcp`. Defaults on; set to `"false"` to disable its detailed log file. |
 
-No explicit plumbing is needed to get these into `webfetch-mcp`: `mcpo` builds the
+No explicit plumbing is needed to get these into `webfetch-mcp`: both `mcpo` and
-spawned child process's environment as the union of its own process environment and
+`supergateway` start the child with the container's environment inherited, so
-any per-server overrides, so anything set on the container's environment is
+anything set on the container's environment reaches `node server.mjs` automatically. (Verified against `mcpo`'s
-inherited by the `node server.mjs` child automatically. (Verified against `mcpo`'s
 `MCPConnectionManager` source, not assumed.)
 
+## Process supervision
+
+`entrypoint.sh` runs both servers under `tini`. If either one exits, the other is
+stopped and the container exits non-zero, so the orchestrator restarts the whole
+thing rather than leaving it half up.
+
 ## Known characteristics
 
+- **The `:8080` endpoint is unauthenticated.** Intended for a trusted LAN only.
+
 - **No URL filtering / SSRF protection.** `webfetch-mcp`'s `web_fetch` tool fetches
   whatever URL it's given, including private/internal addresses. This is a known,
   accepted characteristic of `webfetch-mcp` itself — out of scope for this image to
@@ -64,9 +93,13 @@ inherited by the `node server.mjs` child automatically. (Verified against `mcpo`
   GitHub.
 - `mcpo`: pinned via `ARG MCPO_VERSION` in the `Dockerfile`, installed from PyPI.
 
-Bump either by updating the corresponding `ARG` default in the `Dockerfile`. When
+- `supergateway`: pinned via `ARG SUPERGATEWAY_VERSION` in the `Dockerfile`, installed
+  from npm.
+
+Bump any of them by updating the corresponding `ARG` default in the `Dockerfile`. When
 bumping `mcpo`, double check its CLI flags still match what `entrypoint.sh` assumes
-(`--host`, `--port`, `--api-key`, `--`).
+(`--host`, `--port`, `--api-key`, `--`); for `supergateway`, `--stdio`,
+`--outputTransport`, `--port` and `--healthEndpoint`.
 
 ## CI
 

entrypoint.sh

@@ -1,20 +1,68 @@
 #!/bin/sh
 set -eu
 
+# Runs up to two servers in one container, each spawning its own stdio
+# `node server.mjs` child:
+#
+#   - mcpo (OpenAPI, for Open WebUI) on $MCPO_PORT.
+#
+#   - supergateway (native streamable-HTTP MCP, for coding clients) on
+#     $MCP_PORT, path /mcp.
+#
 # mcpo's --api-key is a CLI flag, not something it reads from its own
-# environment, but the actual value must come from the container's
+# environment, so the command line is built here at container start.
-# environment rather than being baked into the image. This script builds
-# the mcpo command line at container start so that can happen.
 #
 # webfetch-mcp reads SEARXNG_BASE / DEBUG / DETAILED_LOG from its own
-# process environment. No passthrough is needed here: mcpo builds the
+# process environment. No passthrough is needed here: both mcpo and
-# spawned child's environment as {**os.environ, **extra}, so anything set
+# supergateway start the child with this container's environment inherited.
-# on this container's environment reaches webfetch-mcp automatically.
 
-PORT="${MCPO_PORT:-8000}"
+MCPO_PORT="${MCPO_PORT:-8000}"
+MCP_PORT="${MCP_PORT:-8080}"
+ENABLE_MCPO="${ENABLE_MCPO:-true}"
+ENABLE_MCP="${ENABLE_MCP:-true}"
 
-if [ -n "${MCPO_API_KEY:-}" ]; then
+pids=""
-  exec mcpo --host 0.0.0.0 --port "$PORT" --api-key "$MCPO_API_KEY" -- node /app/webfetch-mcp/server.mjs
+
-else
+shutdown() {
-  exec mcpo --host 0.0.0.0 --port "$PORT" -- node /app/webfetch-mcp/server.mjs
+  # shellcheck disable=SC2086
+  [ -n "$pids" ] && kill -TERM $pids 2>/dev/null || true
+}
+trap 'shutdown; wait; exit 143' TERM INT
+
+if [ "$ENABLE_MCP" = "true" ]; then
+  supergateway --stdio "node /app/webfetch-mcp/server.mjs" \
+    --outputTransport streamableHttp --port "$MCP_PORT" \
+    --healthEndpoint /healthz &
+  pids="$pids $!"
 fi
+
+if [ "$ENABLE_MCPO" = "true" ]; then
+  if [ -n "${MCPO_API_KEY:-}" ]; then
+    mcpo --host 0.0.0.0 --port "$MCPO_PORT" --api-key "$MCPO_API_KEY" -- node /app/webfetch-mcp/server.mjs &
+  else
+    mcpo --host 0.0.0.0 --port "$MCPO_PORT" -- node /app/webfetch-mcp/server.mjs &
+  fi
+  pids="$pids $!"
+fi
+
+if [ -z "$pids" ]; then
+  echo "Both ENABLE_MCPO and ENABLE_MCP are false; nothing to run." >&2
+  exit 1
+fi
+
+# Exit as soon as either server dies, taking the other down with it, so the
+# orchestrator restarts the whole container rather than leaving it half-up.
+# POSIX sh has no `wait -n`, so poll instead.
+while :; do
+  for pid in $pids; do
+    if ! kill -0 "$pid" 2>/dev/null; then
+      status=0
+      wait "$pid" || status=$?
+      echo "Process $pid exited (status $status); stopping container." >&2
+      shutdown
+      wait || true
+      exit "$(( status == 0 ? 1 : status ))"
+    fi
+  done
+  sleep 1
+done